top of page

We are indigenous.

Public·281 members

InnJoo I2s Flash File MT6592 Hang On Logo Dead Fix Firmware


Click Here ---> https://blltly.com/2tuR7J



InnJoo I2s Flash File MT6592 Hang On Logo Dead Fix Firmware


How to Fix InnJoo i2s Flash File MT6592 Hang On Logo Dead Issue


If you are looking for a solution to fix your InnJoo i2s flash file MT6592 hang on logo dead issue, you have come to the right place. In this article, we will show you how to download and install the latest firmware for your InnJoo i2s device and restore it to its normal working condition.


The InnJoo i2s is a budget-friendly smartphone that runs on Android 4.4 KitKat and features a 5-inch HD display, a 1.4 GHz octa-core processor, 1 GB of RAM, 16 GB of internal storage, a 13 MP rear camera, a 5 MP front camera, and a 1900 mAh battery. However, like any other smartphone, it may encounter some problems such as hanging on the logo screen, bootlooping, or bricking due to corrupted or outdated firmware, malware infection, or improper flashing.


Fortunately, you can easily fix these issues by flashing the latest firmware for your InnJoo i2s device. Flashing is the process of installing a new software or operating system on your device. It can help you to update your device, fix bugs and errors, improve performance and stability, and unbrick your device if it is stuck or dead.


Before you proceed with the flashing process, you need to download the following files:


The InnJoo i2s flash file MT6592 firmware zip file from https://www.innjoo.com/en/Download. This is the official and tested firmware file for your device that contains all the necessary files and tools to flash your device.


The SP Flash Tool from https://spflashtool.com/. This is a software application that allows you to flash firmware on devices that use MediaTek (MTK) chipsets.


The MTK USB Driver from https://androidmtk.com/download-mtk-usb-all-drivers. This is a driver that enables your computer to recognize and communicate with your device when it is connected via USB cable.


After downloading these files, you need to follow these steps:


Extract the InnJoo i2s flash file MT6592 firmware zip file on your computer using any unzip software such as WinRAR or 7-Zip. You will get a folder named "InnJoo_i2s_MT6592_20141217_4.4.2" that contains several files such as "scatter.txt", "preloader.bin", "system.img", etc.


Install the MTK USB Driver on your computer by running the setup file and following the instructions on the screen.


Launch the SP Flash Tool on your computer by double-clicking on the "flash_tool.exe" file.


Click on the "Download" tab and then click on the "Scatter-loading" button.


Browse and select the "scatter.txt" file from the extracted firmware folder.


Make sure that all the boxes are checked and that the "Download Only" option is selected in the drop-down menu.


Turn off your InnJoo i2s device and remove the battery if it is removable.


Connect your device to your computer via USB cable while holding the volume down or volume up button. This will put your device in download mode.


Click on the "Download" button in the SP Flash Tool and wait for the flashing process to begin. You will see a progress bar and a green circle indicating that the flashing is successful.


Disconnect your device from your computer and insert the battery if it was removed.


Turn on your device and wait for it to boot up. It may take some time for the first boot so be patient.


Congratulations! You have successfully fixed your InnJoo i2s flash file MT6592 hang on logo dead issue by flashing the latest firmware. You can now enjoy using your ec8f644aee






About

Welcome to the group! You can connect with other members, ge...

Members

  • Rustylions
    Rustylions
  • Norah Simon
    Norah Simon
  • mark
    mark
  • Activated PC
    Activated PC
  • Rituraj Phukan

+91 9435060642

©2021 by Indigenous People's Climate Justice Forum. Proudly created with Wix.com

bottom of page